MCS chargers: the industrial system behind megawatt charging
The MCS charging scenario
The electrification of heavy transport is one of the major challenges of today’s mobility landscape. Trucks, buses, and other heavy-duty vehicles require high-capacity batteries, but also infrastructure capable of recharging them in times compatible with daily operations.
In this context, MCS chargers (Megawatt Charging System) emerge as charging systems designed to operate in the megawatt range and enable the operation of heavy electric vehicles on medium- and long-distance routes.
As a reference, the MCS ecosystem is typically associated with maximum levels of up to 1,250 V DC and 3,000 A, which corresponds to a theoretical power of 3.75 MW. In practice, the actual power depends on the vehicle, the battery, the electrical infrastructure, cooling systems, and operating conditions.
What is an MCS charger?
An MCS charger is the system responsible for transferring energy from the electrical grid to a heavy vehicle’s battery.
The grid supplies energy in alternating current (AC), while batteries are charged using direct current (DC). For this reason, the charger must convert AC energy into DC and continuously control charging voltage and current.
In essence, an MCS is a very high-capacity AC/DC power converter. But at the megawatt scale, we are not talking about a simple electrical device: we are talking about a complete industrial system, where power electronics, protection systems, control, communication, cooling, and safety all work in a coordinated way.
The path of energy
Energy follows a clear path: it starts from the electrical grid in AC, passes through the different stages of the charger, and reaches the vehicle’s battery in DC.

Energy is taken from the grid in AC, converted, and delivered to the battery in DC.
Seen in more detail, the MCS integrates a modular architecture made up of electrical, electronic, mechanical, thermal, and control subsystems. All of them must enable the transfer of large amounts of energy in a safe, stable, and efficient manner.

An MCS charger is an industrial system in itself, not just a simple electrical device.
AC grid input
The grid input is the connection point between the electrical infrastructure and the charger. Its function is to adapt the available energy to the system’s needs.
At this stage, power transformers, harmonic filters, and power factor correction systems may be involved. At these power levels, grid compatibility is critical: aspects such as power quality, harmonics, power factor, and grid connection requirements must be carefully controlled.
Switching and protection
The switching and protection stage enables the system to be safely connected, disconnected, and protected.
Circuit breakers, disconnectors, contactors, fuses, and surge protection devices act in response to overloads, short circuits, or abnormal conditions. In a system operating at very high voltages and currents, this stage is essential to protect the charger, the installation, and the vehicle.
AC/DC conversion
AC/DC conversion is the energy core of the MCS charger. In this stage, power electronics devices—such as diodes, thyristors, IGBTs, or SiC devices—convert alternating current into direct current.
There are different possible topologies: diode or thyristor rectifiers, active converters, multi-pulse architectures, or modular solutions. The choice depends on factors such as efficiency, robustness, cost, grid quality, controllability, and bidirectional capability requirements.
DC conditioning
Once the energy has been converted to direct current, it must be conditioned before being delivered to the vehicle.
The DC link incorporates elements such as capacitors, inductors, and filters to reduce voltage and current ripple. Its purpose is to provide a stable, safe DC output that is compatible with the battery’s charging requirements.
Dispenser
The dispenser is the physical interface between the charger and the vehicle. It includes the connector, the cable, and the necessary elements to transfer energy from the DC output to the battery.
It is one of the most critical elements of the system, as it must handle currents on the order of thousands of amperes with safety, mechanical reliability, and thermal control. For this reason, the design of the connector and cable is subject to specific requirements for electrical insulation, ergonomics, communication with the vehicle, and temperature management.
In this context, specifications such as IEC TS 63379 help define requirements for connectors, vehicle inlets, and cable/hoses assemblies in megawatt charging systems.
Control, communications, and software
Control is an essential part of the MCS charger. It is not enough to transfer energy: the system must monitor its own status, communicate with the vehicle, and adapt charging to the battery’s conditions.
To achieve this, sensors, microprocessors, control software, and communication links are integrated. These elements make it possible to regulate voltage and current, monitor critical variables, coordinate charging, and communicate with external systems.
In DC charging, digital communication between the charger and the vehicle is defined in standards such as IEC 61851-24, while ISO/IEC 15118-20 is associated with advanced functions such as charging negotiation, interoperability, and Plug & Charge.
Regulations, safety, and interoperability
The development of MCS chargers is closely linked to international standards that define requirements for safety, electrical interface, communication, connection, and system behavior.
A key reference is IEC 61851-23-3, focused on DC charging equipment for MCS systems. This standard applies to EVSE equipment for energy transfer between the grid and the vehicle, with a maximum grid-side voltage of up to 1,000 V AC or 1,500 V DC, and up to 1,250 V DC on the vehicle side.
These standards enable the development of interoperable, safe, and reliable systems in real-world environments.
Thermal management
At the megawatt scale, even small losses generate a significant amount of heat. As a reference, a 1% loss corresponds to 10 kW of heat per each megawatt transferred.
For this reason, cooling is not a secondary element but a central part of the design. Heatsinks, fans, pumps, heat exchangers, liquid cooling, thermal sensors, and thermal transport systems can be used in the cable and dispenser area.
Proper thermal management improves reliability, extends system lifetime, and enables safer continuous operation.
Conclusion
MCS chargers are a key piece in the electrification of heavy transport. They enable the transfer of large amounts of energy in short periods of time and make it feasible to operate electric vehicles on routes where availability and stopping times are critical factors.
More than just a charger, an MCS is an integrated industrial system that combines grid input, switching and protection, AC/DC conversion, DC conditioning, dispenser, control, communications, standards, safety, and thermal management.
Its design must be robust, efficient, reliable, and easy to maintain. Only in this way will it be possible to deploy a charging infrastructure capable of supporting the transition toward large-scale operational electric heavy transport.
Contribution: Carmelo Candela




